How Long is the Wait Between Solar Booking and Solar Installation?

Solar panels are a superb way to collaborate with nature. On the worldwide map, Australia has higher uptake of solar. A study showed that over 2.68 million rooftop solar systems had been installed in Australia.

However, going solar isn't as easy as buying clothes. First, you investigate, compare, and ask various questions, then you opt to book a panel. If you think about installing rooftop solar panels, the primary question is, how long does it fancy install a solar panel?

You can’t have a solar array installed on your roof the minute you book it. There is often an extended period between booking a solar array and its installation. The time can take between weeks to many months.

In that case, it is often quite frustrating to attend to the installation of your solar array systems. However, it's said that good things take time. therefore the results would be worth your wait.

How long is the wait between solar booking and solar installation?

You have to undergo certain steps after you opt to take a position in solar panels. Each stage will take its own time, counting on the state of conditions you'll face. As a result, the solar installation time can vary from panel to panel.

Read on to understand the method involved in solar array installation and therefore the period involved in each step:

Finding a solar installer

The first concrete step involved in installing a solar array is selecting a solar installer. you ought to not rush on this step. If you select an inexperienced company, you'll regret your decision later. Further, it'll increase your installation time.

General visit [ one to 2 weeks]

When you narrow down your solar installation choices, you'll request a general visit. A representative will come and evaluate your home energy needs. they appear for google maps, check the directions of your roof and therefore the shading on your property to raised coordinate where your residential solar panels are placed.

This whole process approximately takes between one to 2 weeks. However, at this stage, the corporate and customers agree on a price and begin the work.

Pulling permits [ one week to a month]

Before installing solar panels, your solar company, your solar company will get to file a permit together with your government. The permit may vary counting on your location and therefore the quiet solar array you're installing. This process can anywhere take between one week to a month.

Ordering your solar equipment [ at some point to many weeks]

As long as your permits are approved, your solar installer will give the green light to order the equipment. Your installation company may have already got this equipment available, but if not, your project manager will get to work with the company’s shipping department to order the equipment.

If your solar panels and other equipment are coming from overseas, you want to wait several weeks. this will further delay your installation process.

Why choose Aus-Brite Solar?

Aus-Brite solar caters to the solar power needs of all Australian households. we provide clean energy solutions to support your energy needs. you'll get the best solar deals in Sydney from our solar providers.

Read More: How long is the wait between solar booking and solar installation?

10 Important Things to Consider Before Installing Rooftop Solar Panels

Every serious purchase in your life requires careful consideration and advance planning. The installation of rooftop solar panels is no exception. Since this is a huge investment, certain factors need to be accurately calculated before choosing the solar panel that best suits your needs.

Today, millions of people choose solar panels as an excellent sustainable green energy option. Solar panels not only help offset energy costs but also represent a clean and environmentally friendly energy source.

More and more people are installing solar panels on the roof, why not? A report shows that more than 2 million homes in Australia have rooftop solar panels with a total capacity of more than 10 GW. Therefore, using solar energy is an easier way to contribute to a sustainable future.

A carefully planned rooftop solar panel system can turn your investment into a smarter investment. However, understanding the relevant factors before installing solar panels will help you avoid installation errors and unpleasant surprises.

10 Important Things to Consider Before Installing Rooftop Solar Panels

So, we have put together some basic things to consider before installing rooftop solar panels.

Choosing the correct solar panels

The solar panel largely depends on the type of solar panel you choose to install on your roof. Unless you have first-hand information about solar panels, it can be difficult to make the right decision.

 Also, it is always advisable to buy a solar panel from a reputable company because it can be used for decades. In addition, it can also save you a lot of electricity bills. Solar panels are generally divided into three basic types:

• Monocrystalline panels 

These panels are good at converting sunlight into electricity. They are efficient and take up less space on the ceiling.

• Polycrystalline panel

Compared to monocrystalline panels, these panels have lower heat resistance. However, these panels take up more space on the ceiling.

• Thin Film Panels

These panels are generally made by depositing semiconductor materials on ceramic materials. Although the cost is low, they need more roof space.

You can filter all options and choose the one that best suits your budget and roof needs.

Consider the type of roof

The roofs of millions of homes receive a lot of sunlight during the day. Therefore, the demand for rooftop solar systems has increased dramatically in recent years. Installing a solar panel system can be one of the smartest investments in your life.

However, before installing solar panels, the first important step is to determine if your roof is ready to install solar panels. Before opting to install solar panels on the roof, you need to consider certain things.

• Roof Shapes

Roofs come in many different shapes and sizes. Before proceeding to install solar panels, make sure your roof has enough space to install solar panels. However, if there is not enough space, you may not get the expected return on your investment. 

• Roof condition

Before buying solar panels, check the roof. Solar panels can add extra weight to your roof. Therefore, your roof must be strong enough to support the weight of the solar panels. 

• The weight that the roof can support

A typical solar panel with a mounting frame weighs approximately 12 kilograms per square foot. This limit is usually within the acceptable range of roof loads.

• Roof Warranty

If your solar panels are expected to last 20 years, but your roof can only be used for 10-15 years, your maintenance costs may increase.

The correct positioning of the solar panel

The correct positioning of a solar panel is an important factor to consider before installing it on the roof. When the sun's rays illuminate the surface of the solar panel vertically, the solar panel will use the most energy. Therefore, proper tilt angle and direction help to ensure that the solar panel produces maximum energy. 

• Address

If you live in the Northern Hemisphere, the solar panel placement rule is that the solar panels should face south. However, if you live in the south, the panel must face true north. Solar panels facing east and west generate less electricity than solar panels facing the equator. 

• Angle 

The tilt frame is used to tilt the solar panel towards the sun. The optimal tilt angle of the solar panel is determined by the installation latitude of the solar panel. Optimizing the tilt angle can not only increase your efficiency but also help you generate more electricity. 

Check Required Energy Usage

Your home's energy needs play a vital role in influencing your decision to choose solar panels. After knowing the average energy required, you can decide how many solar panels to install. 

A typical solar panel is estimated to generate about 300 watts of power in one hour. Also, your solar installer can help you measure energy use. 

To determine your home's average energy needs, you can check your past utility bills. 

First, you need to multiply your home's hourly energy demand by the peak sun hours in your area. After that, divide it by the power of the panel. In this way, you can calculate your average energy demand. 

 Assess local financial incentives

To encourage increased use of solar energy, the government offers incentives to help make solar energy cheaper. The government offers incentives for people who want to install solar panels. Before installing solar panels in your home, you can evaluate these economic incentives. 

• Investment grant

In the investment grant, the cost of installing solar panels is partially compensated. 

• State Solar Rebate 

No matter where you live, you can enjoy a state solar rebate. You can get a tax credit for investing in solar panel installations. 

• Feed rate 

 In the feed rate or net metering, the solar energy produced is sold in exchange for electricity

Read More: 10 Important Things to Consider Before Installing Rooftop Solar Panels

When Do Solar Panels Work Best? — Aus-Brite Solar

With higher energy prices and more working-from-home, many folks are wanting to find ways to curb our energy bills.

So, it’s no surprise that the quantity of solar panel installations has skyrocketed, but many folks are still asking the question: when do solar panels work best?

Obviously, solar panels don’t work well inside your garage or within the shade, but there’s more thereto than just “put solar panels within the sun”.

In this blog, Sydney’s most popular solar panel supplier, Aus-Brite Solar, will give you a quick overview of how to get the most out of solar panel installation Sydney-wise.

Capture the Afternoon Sun

Solar cells, also called photovoltaic cells, convert the sun’s energy into electricity. However, for max power generation, solar panels believe in direct sunlight and therefore the angle of the sun rays as they hit the solar modules.

Ideally, the sun’s rays hit your solar panels at a right angle, usually between the time period of 11 am and 4 pm when the sun is at its highest.

Ensuring that your solar panels are positioned to require advantage of those peak sun hours is the initiative to getting the most out of your solar panels.

Follow the Sunshine

If your roof isn’t ideally positioned to capture all the afternoon sun, all isn’t lost! Sun tracking solar panel mounts are often used to help your solar panels follow the sun, which suggests you also get to form the most of a sunny day in terms of your energy generation and use.

The benefits of sun-tracking solar panels are manifold: they work well for solar panels installed on the surface, you’ll see an energy gain of between 25 to 50%, and in most cases, they’re going to enable you to put in solar panels, even on a property or rooftop that’s not ideally positioned.

For the rest of us, solar panels got to be positioned facing North to be a workable source of energy. Thankfully, most pitched roofs will have an appropriate surface and therefore the mounts are often pitched to supply your panels with the sunniest angle.

Pick the proper Number

The number of solar panels you get installed plays an enormous role in your solar power generation. Thankfully, you’ll calculate what percentage of solar panels you’ll need to support their sun exposure.

On average, a typical Australian household consumes around 18 Kilowatt (KW) per day or 6570 KW per hour.

A consultation with one of our Aus-Brite Solar experts will assist you to decipher how much solar power you want to get per day and how many solar panels it’ll fancy do the work.

You can help the method along by first assessing what proportion of energy you employ per day, then comparing that energy expenditure against your expectations of solar panels.

It may help to understand that one solar panel can produce around 1,000 W /m2 during peak sun hours, which works out at around 300 watts per hour. That said, an excellent deal depends on the panel size and manufacturer. When it involves solar panel systems, you get what you buy.

Finally, you’re getting to get tons more bang for your buck if you invest during a solar array also. As we all know, some days are sunnier than others, but solar batteries enable you to store excess energy for a time period. If you’re trying to find continuous solar power to power up your home, then a solar array is the way to go.

Sun Power Your Home Today

Aus-Brite Solar has been supplying and installing solar Panels in Sydney and batteries for quite some time now.

We come recommended by Sydney households for our speedy installations, friendly and helpful customer support, quality product range, and trustworthy advice.